Fluid Infusion Warmer

Infusion Warmer1, OverviewIntravenous infusion is widely used in clinical practices nowadays. However, if the infusion is being done in a relatively low temperature environment, patients may feel uncomfortably cold because of the huge temperature difference between infusion fluid and human blood. In extreme cases, chills, blood vessel spasm, body pain, drip sluggish, stomach pain or even death may occur. Fluid Infusion Warmer (FIW) is designed to eliminate above situations. When infusion fluid passes through this device, it will be heated to the right temperature for human bodies. Reducing temperature difference between infusion fluid and human body can avoid many adverse reactions and improve drug assimilation by human body. The immediate benefits include improved medical care quality, less patients’ suffering and shorter recovery time. 2, Product FeaturesFor safety and reliabiliby, this product uses reenforced protective insulation design and 3-way temperature detection/control (preventing device from floating away from the preset temperature) This product is easy to use, small in size and durable. It can be used in almost all clinical enviiornments. Novel appearance with streamlined design. Advanced PTC board heating technology makes heating process fast and even. Device temperature can reach 26C 35C within 3 5 minutes after power is turned on. This product can use both 110V and 220V AC power directly. 3, ApplicationsLow temperature enviorments Hospitals and home. Operating room and special care unit Infusion tubes is Φ5 mm in diameter, velocity within 0.2ml/min—10 ml/min. Do not use if fluid is required to store under 20C. Operation EnvironmentTemperature: 0 20CHumidity:≤70%Power Source:100 240Vac Frequency: 50/60Hz Safety and EMC/EMIMeets EN 60335-2-35 Meets EN 60601-1 Meets EN 55011 class B Product CapabilitiesWhen velocity is 2 ml/min—10 ml/min, Infusion temperature is 26C - 35C.